Proper installation of Lacing Hooks is crucial to ensure their proper use and the aesthetic appearance of the shoes. The following are general installation steps and precautions:

Preparation before installation:

Preparation tools: Prepare the corresponding tools according to the installation method of the selected Lacing Hooks, such as screwdrivers, pliers, punchers (if needed), etc.

Clean installation location: Ensure that the position where Lacing Hooks are installed on the shoes is clean, free of debris and dust to ensure good adhesion.

Installation steps:

Positioning: Determine the installation position of the Lacing Hooks based on the design of the shoes and personal usage habits, and make proper markings.

Punching (if necessary): If there are no reserved installation holes on the shoes, use a suitable puncher to punch holes at the marked positions, ensuring that the size of the holes matches the installation components of the hook.

Install hooks:

Screw fixation: Place the Lacing Hooks in the marked position, thread the screws through the mounting holes on the hooks, and then tighten the screws with a screwdriver to ensure that the hooks are securely fixed to the shoes.

Embedded installation: Align the embedded part of the hook with the installation position and gently press it in place with pliers or appropriate tools.

Inspection and adjustment: After installation, check whether the hook is firmly installed and positioned correctly. If there is any deviation, adjust it in a timely manner.

Precautions after installation:

During the period after installation, avoid pulling the shoelaces too hard to prevent the newly installed Lacing Hooks from loosening.

Regularly check the fixing condition of the hook, and if there is any looseness, tighten the screws or adjust them in a timely manner.

If minor damage is caused to the shoes during installation, such as scratches or wear, appropriate shoe polish or repair agents can be used for treatment.