Stainless Steel Dome Caps

Stainless Steel Dome Caps are used to cover the pin sharp ends as an safe fastener


Contact

Product Detail

Stainless Steel Dome Caps are used to cover the pin sharp ends as an safe fastener, 304 Stainless Steel and 316 Stainless Steel is available for the raw material. others are available by special order.

Stainless Steel Dome Caps are used for Lacing Anchors, Quilting Pins. They also can be used for CD Weld Pins, Perforated Base Insulation Pins or Self Adhesive Insulation Stick Pins when their material is in stainless Steel.

After these insulation fasteners are installed on the insulation materials or removable insulation blankets or covers, use a self locking washer to secure the insulation fasteners, finally use a dome cap to cover the sharp pin end.

There are 3 sizes of dome caps are available now, the diameter is 22mm( 7/8"), 28mm, 38mm( 1-1/2"), they can be used for 10 Gauge( 3.4mm), 11 Gauge( 3.0mm), 12 Gauge( 2.7mm) and 14 Gauge( 2.0mm) in standardard.

Packing

ProductPackingWeightBox size
Stainless Steel 22mm Dome Caps1000Pcs3.0 KG26×26×8 CM
Stainless Steel 28mm Dome Caps1000Pcs4.8 KG26×26×13 CM
Stainless Steel 38mm Dome Caps1000Pcs6.5 KG26×26×21 CM


Relate Products

We manufacture all kinds of insulation pins and washers for insulation material or removable insulation blankets. our product include the Lacing Anchors, Quilting Pins, CD Weld Pins, Cupped Head Pins, Perforated base Pins, Self Adhesive Pins, D Ring, Rectangular Rings, Self locking washers, Dome Caps.